Dayman Technical Build Chemicals

Phone : + 90 224 452 55 16

Email : info@dayman.com.tr

AUXILIARY PRODUCTS

AQUATEX – 2700

Textile membrane for under water ceramic insulation.

Description

Textile membrane for under water ceramic
insulation.

DESCRIPTION:
Textile membrane for under water ceramic
insulation.

ADVANTAGES:
Faster.
Easy application.
Crack bridging.
Solvent free.
Resistant to chemicals.

USAGE AREAS:
All ceramic surfaces.
Plaster and cement panels.
Internal and external application areas.
Terraces.
Wet areas.
Bathrooms.

( 23 °C Temparature and 50 % for relative
humidity)
Product Carrier : 1,00×50,00 mt.height
Middle Tier : Polyethylene Foil
Mebrane With : 1000 mm
Roll Length : 30 m
Color : Yellow
Product Thickness : Apprx. 0,5 mm
Packing: 1 x 30 m = 30 m one
cartoon,white
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.

Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
Deep gaps on the surfaces should be
repaired by DAYMAN REPAIR PLUS,
DAYMAN EPO MORTAR or DAYMAN
BOND EPO.
Corner joints should be chamfered with
DAYMAN REPAIR PLUS at 4×4 cm size.
The outer corners must be broken and
chamfered.

Application:
AQUATEX – 2700 application,
DAYMAN D-LASTİK SUPER 430
DAYMAN D-LASTİK SUPER X 427
DAYMAN CERA CEM FLEX 910
DAYMAN CERA CEM FLEX 912
Can be applied by the one of the product
that specified above.
The product is applied to surface that has
been prepared before.
After the product application DAYMAN
AQUATEX – 2700 is bonded from top to
bottom.
DAYMAN AQUATEX – 2700 is adhered to
the surface without having any air bubbles
under it.
The joints are overlapped at the marked
places and adhered with DAYMAN D-TIRE
SUPER X 427.

If the weather is rainy or possible rainy days
the application should not be done,
After the application it must be protected
from strong wind, storm and sun in the first
24 hours,
The application should be made on the part
of the structure that comes into contact with
water.
As the product become slowly cured in the
cold weathers, the second coating must be
done when the first coating is completely
becoming dry.
Ensure that the ambient and floor
temperature is between 5 ° C and 30 ° C.

CLEANING OF INSTRUMENTS:
Should be cleaned by solvent when it wet.
After become dry should be cleaned by the
mechanical ways.

CONSUME:
§ 1,07 m²/m².

PACKING:
30, 00 m² roll.

SHELF LIFE:
24 months.
Do not stack pallets on top of each other, it
should be shipped first in first out.

SAFETY RECOMMENDATIONS:
Wear suitable protective clothing, protective
gloves, goggles and mask during
application..
No food or beverage should be allowed in
the application area.
For more information please check the
Material Safety Data Sheet.

LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş cannot accept any
responsibility that occurs because of missuse, it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description

Click to view the Technical Sheet.

× WhatsApp Line