D-GROUT – 901
Cement based, polymer modified, high performance, high resistance waterproof liquid
grout mortar
Description
Cement based, polymer modified, high
performance, high resistance, resistant to
sudden temperature changes, waterproof
liquid grout mortar.
DESCRIPTION:
Cement based, polymer modified, high
performance, high resistance, resistant to
sudden temperature changes, waterproof
liquid grout mortar.
ADVANTAGES:
Very high adherence,
Easy and fast preparation,
Does not do shrink crack,
Easy and fast application,
Provides a high level of resistance in the
freeze-thaw cycle.
It is a waterproof product because of low
ratio of cement&water.
USAGE AREAS:
In the RES switchboard to fix and fill the
tribune works.
Installation of manhole covers,
In the manufacture of curtains and columns
and pile heads,
Fixing of the machine feet,
At the fixed point of the steel columns,
In the assembly of prefabricated concrete
building elements,
In the repair of concrete surfaces,
It can be used to fill the vacant spaces
( 23 °C Temparature and 50 % for relative
humidity)
Mix Density : 2,20 kg/dm3
Compressive Strenght 28 days : ≥ 70
N/mm²
Bending Strenght 28 days : ≥ 7,0 N/mm2
Adherance : 2,0 N/mm²
Application Thickness: 10mm 45 mm
Total Curing Time :28 days
Time to Service Opening : 24 hours
Heat Resistance : -20 °C +400°C
Application Temperature : +5°C +35°C
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
In case of the necessity the surface should
cleaned mechanically
Oil, grease, dirt, paint, salt and vomiting that
prevent adhesion should be removed.
The floor should be moistened before
application, but should not be allowed to
water ponding.
Preparation Of The Mixture:
Pour 4,0 liters of clean water into an empty,
clean bucket, and slowly replenish DGROUT 901 and mix with a low speed
mixer at 400 rpm until no lumps remain.
Wait 5 minutes to mature of the screed.
Before starting the application mix again for
30 second.
Application:
Prepared mortar is applied with suitable
equipment.
The area to be cast must be molded.
Create an area where air gaps can be
removed.
The mold must be installed in a way to
prevent water leakage.
The mold must be filled on one side without
interruption, thus preventing air formation in
the mold.
Air bubbles may prevent surface contact
and weaken adherence.
Due to its rapid setting, the mortar, which is
prepared should be applied without waiting.
The mortar should swelled with iron bar in
order to settle well.
Due to the expansion properties of the
product, the process should be completed
within 3-5 minutes in order to have
maximum benefit.
Min. 10 mm Max 45 mm thickness should
be applied.
Thick applications should be applied in 2 -3
coats.
Wait until complete drying between coats.
The expired mortar should be disposed