Alkali-resistant, fitting mesh corner profile for jacketing applications
Description
Alkali-resistant, fitting mesh corner profile
for jacketing applications
DESCRIPTION:
Alkali-resistant, fitting mesh corner profile
for jacketing applications
ADVANTAGES:
Protect the jacketing of the plaster from
breaks.
It is alkali resistant.
It is resistant to temperature changes.
It is easy to apply.
Do not shrink and diffuse.
USAGE AREAS:
It is used in the application of the DAYMAN
D-THERM 552
( 23 °C Temparature and 50 % for relative
humidity)
Dimension: 1,00×50,00 mt.height
Weight : 160 gr/ m2
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
It should be cut and prepared according to
place that going to be used in application.
It should be overlapped 10 cm at the joints
with DAYMAN D-TEX 160.
DAYMAN D-THERM 552 is embedded in
the D-TEX 160 – 2810 product when it is wet
after 1 coat is applied.
After it become dry the second layer should
be done with DAYMAN D-THERM 552.
CONSUME:
Various 1,10 mt/m².
PACKING:
50,00 mt
COLOR:
White
SHELF LIFE:
Should be stored upright.
Protect from direct sunlight.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş cannot accept any
responsibility that occurs because of missuse, it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description
