D-THERM – 554
Cement based, line textured, water-repellent, special chemical additives
Description
Cement based, line textured, waterrepellent, special chemical additives,
decorative plaster.
- Usage Areas
- Technical Specifications
- Method of Application
- Additional Information
- Technical Leaflet
- Videos
DESCRIPTION:
Cement based, line textured, waterrepellent, special chemical additives,
decorative plaster.
ADVANTAGES:
Excellent adhesion to mineral surfaces.
Easy to apply.
Water vapor permeable.
Resistant to freeze – thaw cycle.
Easy to prepare.
Working time is long.
USAGE AREAS:
Outdoor wall applications that needs to
show a decorative view
As a last plaster before the insulation.
((23°C, %50 Relative Humudity)
Dry Bulk Density : 1600 kg/m3
Total Curing Time : 28 Days
Temperature Strength :-20 °C +80°C
Application Temperature :+5°C +30°C
Color : White
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
In case of the necessity the surface should
cleaned mechanically
Oil, grease, dirt, paint, salt and vomiting that
prevent adhesion should be removed.
Preparation Of The Mixture:
6-6, 5 liter water is poured into an empty
and clean bucket, pour slowly D-THERM
554 into the water bucket and use 400 rpm
mixer until eliminate chunks of the powders.
Rest 5 minutes to have the mortar.
Before starting the application mix 30
second again.
Application:
DAYMAN D-THERM-554 should be
plastered by a steel trowel as
homogenously on the surface that plastered
by DAYMAN D-THERM-552 should be is
applied to the surface plastered with
DAYMAN D-THERM-552.
The application should be done in a one
shot.
The surface is designed by a trowel.
Temperature should be between +5 °C and
+35 °C during the application.
Do not apply on surfaces that are at risk of
frost.
In addition, it should not be applied in
extremely hot, rainy or windy weather.
After the application the applied area should
prevent from the direct water contact in 24
hours.
CLEANING OF INSTRUMENTS:
DAYMAN D-THERM 554 should be cleaned
by water when it wet.
DAYMAN D-THERM 5534after become dry
should be cleaned by the mechanical ways.
CONSUME:
Various 2, 50-3, 50 kg/m².
PACKING:
25, 00 in a craft bag
110×100 Pallet Dimension
64 Qty on pallet
COLOR:
White
SHELF LIFE:
1 year from the production date under
proper storage conditions.
Close tight the opened bags.
SAFETY RECOMMENDATIONS:
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
As it cement based, do not breath and do
not touch with skin and eyes,
Due to the irritating effects of the cured
materials, skin and eyes should not be
contacted, in case of contact with wash
plenty of water and soap, if swallowed seek
medical attention immediately.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
Store out of reach of children.
This product packaging must be disposed of
in accordance with applicable laws.
This responsibility is belong the end user.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description