EPO MORTAR – 855
Epoxy based, solvent free, coarse gravel, high resistant repairmen mortar
Description
Epoxy based, solvent free, coarse gravel,
high resistant repairmen mortar.
DESCRIPTION:
Epoxy based, solvent free, coarse gravel,
high resistant repairmen mortar.
ADVANTAGES:
Very high adherence.
Fast and easy preparation.
Does not do shrinkage cracks.
Provides the needed performance in a line.
Fast and easy application.
Can be used in structural repairs.
USAGE AREAS:
Concrete surfaces repairmen.
Repair of the places such as plant,
warehouse, hospital etc.
As floor covering for high resistance floors.
In the installation of dilatation profiles.
In order to obtain a solid surface in the
gross concrete.
Creation of corner chamfers.
Can be used on epoxy flooring and prewaterproof floor preparation.
( 23 °C Temparature and 50 % for relative
humidity)
Conventional Mass per Volume: 2,00
kg/dm3
Compressive Strenght 7 days : ≥ 70
N/mm²
Bending Strenght 7 days : ≥ 25 N/mm2
Adherance : 2,05N/mm²
Application Time : 40 minutes
Pre Setting Time : 24 Hours
Total Curing Time : 7 days
Heat Resistance : -20 °C +70°C
Application Temperature: +5°C +35°C
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
In case of the necessity the surface should
cleaned mechanically
Oil, grease, dirt, paint, salt and vomiting that
prevent adhesion should be removed.
Preparation Of The Mixture:
Mixed A + B should be mixed by a 400 rpm
low speed mixer for a few minutes until it
reaches a homogenous consistency to
make ready for the application.
Application:
If DAYMAN EPO PR 850 primer is to be
applied on the floor, after the application, it
should be repaired when wet.
EPO MORTAR can be applied with a trowel
or spatula.
Min.4 mm max.50 mm can be applied.
Thick applications can be applied in 2 -3
layers.
Wait until complete drying between coats.
The prepared product should be used within
40 minutes.
The expired, mixture should not be used
and should be disposed of.