Dayman Technical Build Chemicals

Phone : + 90 224 452 55 16

Email : info@dayman.com.tr

PRIMERS

MOLD PAINT SOL – 621

Improved Solution for Mould Clean

Description

It is a special solution used for cleaning
molds on mold-formed surfaces.

Category

DESCRIPTION:
It is a special solution used for cleaning
molds on mold-formed surfaces.

ADVANTAGES:
Cleans molds on the surface.
Prevents the formation of new mold.

USAGE AREAS:
DAYMAN MOLD PAINT SOL-621 can be
used to remove mold before applying
moisture paint.

Preparation Of The Mixture:
DAYMAN MOLD PAINT SOL-621 is ready
for use.Using DAYMAN LATEX – C 502
while preparing the product will increase the
strength of the product and increase the
abrasion resistance.

Application:
It is applied by spraying onto the moldy
surface directly onto the mold.
After 45 min.clean with a dry cloth or brush.
Do not pre-clean.

Temperature should be between +5 °C and
+35 °C during the application.
Do not apply on surfaces that are at risk of
frost.
The product should be protected from rain,
water, frost and negative external factors
until curing.
After the application should prevent from
direct contact with water the first 24 hour.

CLEANING OF INSTRUMENTS:
DAYMAN MOLD PAINT SOL – 621 should
be cleaned by water when it wet.
DAYMAN MOLD PAINT – 621 after become
dry should be cleaned by the mechanical
ways.

CONSUME:
Various 0,300 – 0,500 kg/m².

PACKING:
0,50 kg.

COLOR:
Transparent

SHELF LIFE:
1 year from the production date under
proper storage conditions.
The opened pack should be closed tightly

SAFETY RECOMMENDATIONS:
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
As it is cement based do not swallow the
powder.
Due to the irritating effects of the cured
materials, skin and eyes should not be
contacted, in case of contact with wash
plenty of water and soap, if swallowed seek
medical attention immediately.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
Store out of reach of children.
This product packaging must be disposed of
in accordance with applicable laws.
This responsibility is belong the end user.
For more information please check the
Material Safety Data Sheet.

LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description

Click to view the Technical Sheet.

× WhatsApp Line