Dayman Technical Build Chemicals

Phone : + 90 224 452 55 16

Email : info@dayman.com.tr

REPAIR MORTAR

REPAIR PLUS – 905

Thick aggregate,cement based, polymer modified, has high performance and resistance
repair mortar

Description

Thick aggregate,cement based, polymer
modified, has high performance and
resistance, high strength, resistance to
sudden temperature changes and coarse
repair mortar..

Category

DESCRIPTION:
Thick aggregate,cement based, polymer
modified, has high performance and
resistance, high strength, resistance to
sudden temperature changes and coarse
repair mortar..

ADVANTAGES:
Easy and quick to prepare.
Supported with polymer and fiber.
High adherence.
Can be used in structural repairs.
Does not shrink
Provides high resistance to freeze-thaw
cycle.
Provides high resistant because of low ratio
of cement and water.
Does not sag on vertical surfaces.
No shrinkage and shrinkage cracking.
It gives the desired performance in one
layer.

USAGE AREAS:
Repairment of the concrete surface,
Repairmen of the Segregation
To filling of the thread holes,
In order to obtain a solid surface in the
gross concrete,
Creation of corner chamfers,
To makes corner chamfer,
Can be used in floor preparation before
waterproofing,

( 23 °C Temparature and 50 % for relative
humidity)
Mix Density : 2200 kg/m3
Compressive Strenght 1 day : ≥ 20
N/mm²
Compressive Strenght 28 days: ≥ 60
N/mm²
Bending Strenght 28 days : ≥ 7,5 N/mm2
Adherance : 2,2 N/mm²
Application Thickness : 10mm – 45 mm
Total Curing Time : 28 days
Heating Strenght : -20 °C +400°C
Application Temperature : +5°C +35°C
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.

Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
If necessary, the surface should be cleaned
mechanically.
Remove oil, grease, dirt, paint, and salt
desorption from adhesion.
The floor should be moistened before
application, but should not be allowed to
water ponding.

Preparation Of The Mixture:
Pour 4-4,25 liters of clean water into an
empty, clean bucket, and slowly replenish
REPAIR PLUS – 905 and mix with a low
speed mixer at 400 rpm until no lumps
remain.
Allow the mortar to rest for 5 minutes.
Mix again for 30 seconds before application.
Using DAYMAN LATEX – C 502 while
preparing the product will increase the
strength of the product and increase the
abrasion resistance.

Application:
The prepared mortar is applied with suitable
equipment.
Min. 10 mm Max 45 mm thickness should
be applied.
Thick applications should be applied in 2 -3
coats.
Wait until complete drying between layers.
The prepared product should be used within
2-3 hours.
Expired mortar should be disposed of.

The surface temperature during application
should be between +5 °C and+35 °C,
Do not apply on surfaces that are at risk of
frost,
The product must be protected from rain,
water, frost and the other external factors
until curing.
This time may vary according to
temperature and humidity.

CLEANING OF INSTRUMENTS:
DAYMAN REPAIR PLUS 905- should be
cleaned by water when it wet.
DAYMAN REPAIR PLUS 905 – after
become dry should be cleaned by the
mechanical ways.

CONSUME:
1,92 kg/ dm³

PACKING:
Powder 25, 00 kg. Craft bag
80×120 pallet dimension
54 qty.on pallet

COLOR:
Grey

SHELF LIFE:
1 year from the production date under
proper storage conditions.
Opened packages should be kept tightly
closed.
Wear suitable protective clothing, protective
gloves, goggles and mask during
application.

SAFETY RECOMMENDATIONS:
As it cement based, do not breath and do
not touch with skin and eyes,
Due to the irritating effects of uncured
materials, skin and eyes should not be
contacted, in case of contact with wash
plenty of water and soap, if swallowed seek
medical attention immediately.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
Store out of reach of children.
This product packaging must be disposed of
in accordance with applicable laws.
For more information please check the
Material Safety Data Sheet.

LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description

Click to view the Technical Sheet.