DESCRIPTION:
Cement based, fast setting, mineral filler,
waterproof and special chemicals additive,
one component water sealant mortar.
ADVANTAGES:
As soon as it comes into contact with water,
it reacts very fast, become harder within 60-
180 seconds and stops water flow.
Easy and fast application.
USAGE AREAS:
Stopping the pressurized water,
Stopping water for the underwater
application,
Stopping active water leaks,
Waterproofing of the concrete surfaces,
Waterproofing of the elevator well,
Waterproofing of the horizontal and vertical
surfaces,
Waterproofing the negative and positive
sides.
In water stocks,
Reinforcement concrete,
( 23 °C Temparature and 50 % for relative
humidity)
Application Temperature : +5°C +30°C
Compressive Strenght 30 minutes later:
7 N/mm²
Heating Strenght : -20°C +80°C
Coating on: 3 minutes
Final Setting : 5 minutes
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
In case of the necessity the surface should
cleaned mechanically.
Oil, grease, dirt, paint, salt and vomiting that
prevent adhesion should be removed.
Application:
Take enough DAYMAN W-STOP SPEED to
your hand and press trough to empty hole
that water is come.
Keep pressing until ensure that the water is
stopped.
Due to the water has a direct effect on the
reaction rate, the mix should be done with
the warm water in winter, it will help to have
a fast result.
The expired mortar should be disposed of.
