D-THERM 550
Carbon reinforced, low heat conduction coefficient, heat insulation sheet.
Description
Carbon reinforced, low heat conduction
coefficient, heat insulation sheet.
Category THERMAL INSULATION SYSTEMS
- Related Products
- Usage Areas
- Technical Specifications
- Method of Application
- Additional Information
- Technical Leaflet
- Videos
DESCRIPTION:
Carbon reinforced, low heat conduction
coefficient, heat insulation sheet.
ADVANTAGES:
Heating conductivity coefficient is low.
Easy to apply.
USAGE AREAS:
DAYMAN D-THERM, Thermal Insulation
System is used as an insulation sheet.
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
The product should be cut and prepared
according to the area to be used in the
application.
At the joints with DAYMAN D-TEX 160, 100
cm should be overlapped.
After the application of DAYMAN D-THERM
552 as 1 layer, when the product is wet, it is
embedded in the D-THERM 559 product.
After drying, the second layer of DAYMAN
D-THERM 552 is applied.
Application:
The product should be cut and prepared
according to the area to be used in the
application.
At the joints with DAYMAN D-TEX 160, 100
cm should be overlapped.
After the application of DAYMAN D-THERM
552 as 1 layer, when the product is wet, it is
embedded in the D-THERM 559 product.
After drying, the second layer of DAYMAN
D-THERM 552 is applied.
CONSUME:
1, 00 m²/m²
PACKING:
Various according to thickness.
COLOR:
Grey
SHELF LIFE:
Store in suitable condition.
Keep away from Inflammable materials and
flame sources.
Do not put to direct sunlight.
Keep away from solvent, thinner and etc.
chemicals.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description
PRODUCTS
- BITUMEN BASED WATERPROOFING PRODUCTS
- MINERAL BASED WATERPROOFING PRODUCTS
- RESIN BASED WATERPROOFING PRODUCTS
- POLYUREA BASED WATERPROOFING PRODUCTS
- REPAIR MORTAR
- CEMENT BASED FLOORING PRODUCTS
- EPOXY BASED FLOORING PRODUCTS
- CERAMIC ADHESIVE AND JOINT FILLERS
- MORTAR ADDICTIVES
- THERMAL INSULATION SYSTEMS
- AUXILIARY PRODUCTS
- MASTICS
- SPECIAL PAINTS
- PRIMERS
- ANCHORING PRODUCTS
- INJECTION PRODUCTS
- ACCESSORIES AND APPLICATION PRODUCTS