D-THERM 559
Alkali-resistant, mesh corner profile for jacketing applications
Description
Alkali-resistant, mesh corner profile for
jacketing applications
DESCRIPTION:
Alkali-resistant, mesh corner profile for
jacketing applications.
ADVANTAGES:
It provides smooth corner lines in sheathing
application.
It is alkali resistant.
It is resistant to temperature changes.
It is easy to apply.
USAGE AREAS:
It is used in the application of the DAYMAN
D-THERM 552
( 23 °C Temparature and 50 % for relative
humidity)
Dimension: 2,50 mt.height
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
It should be cut and prepared according to
place that going to be used in application.
It should be overlapped 100 cm at the joints
with DAYMAN D-TEX 160.
DAYMAN D-THERM 552 is embedded in
the D-THERM 559 product when it is wet
after 1 coat is applied.
After it become dry the second layer should
be done with DAYMAN D-THERM 552.
CONSUME:
Various 0,25 mt/m².
PACKING:
62,50 mt
COLOR:
Orange
SHELF LIFE:
Should be stored upright.
Protect from direct sunlight.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description