AC CURE – 710
Acrylic, water and acrylic emulsion based
Description
It is an acrylic, water and acrylic emulsion
based concrete curing material used on
concrete, screed and cement based
surfaces, which forms a layer that increases
the mechanical resistance on the surface.
- Usage Areas
- Technical Specifications
- Method of Application
- Additional Information
- Technical Leaflet
- Videos
DESCRIPTION:
It is an acrylic, water and acrylic emulsion
based concrete curing material used on
concrete, screed and cement based
surfaces, which forms a layer that increases
the mechanical resistance on the surface.
ADVANTAGES:
Prevents rapid water loss from newly spilled
concrete.
It keeps the water in concrete for hydration.
It is more economical than other curing
methods.
Can be used indoors.
Solvent free
It prevents cracks in the retraction.
Easy and fast implementation.
USAGE AREAS:
Indoor and outdoor,
In all site concretes
After the surface hardener,
Can be used in horizontal and vertical
concrete construction elements for curing.
( 23 °C Temparature and 50 % for relative
humidity)
Product Type : Acrylic Resin
Dry Time : 2,5 hours
Color : White Liquid
Application Temperature : +5°C +35°C
Density : 1 kg/dm3
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Application:
It is applied on newly cast concrete by roller
or spraying equipment.
The product should be applied
homogeneously that no spaces are left on
the surface.
Temperature should be between +5 °C and
+35 °C during the application.
Do not apply on surfaces that are at risk of
frost.
Do not apply early or too late.
After application, it must be protected from
direct water contact and pedestrian traffic.
CLEANING OF INSTRUMENTS:
DAYMAN AC CURE – 710 should be
cleaned by water when it wet.
DAYMAN AC CURE – 710 after become dry
should be cleaned by the mechanical ways.
CONSUME:
Raw concrete surface: 0,200 – 0,250 kg/m²
If surface hardener is applied: 0,150 – 0,200
kg/m²
PACKING:
Liquid: 30 kg. plastic bucket
Pallet 80×120
Qty on pallet 24
COLOR:
White
SHELF LIFE:
1 year from the production date under
proper storage conditions.
Opened packages should be kept tightly
closed.
Should be storage under 5°C temperature if
there is a frost risk.
SAFETY RECOMMENDATIONS:
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
Store out of reach of children.
This responsibility rests with the end user of
the product.
This product packaging must be disposed of
in accordance with applicable laws.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description