DESCRIPTION:
Polyester based, two component chemical
anchoring product.
ADVANTAGES:
Applied with pistol.
It is economical.
Thixotropic, does not sag.
Easy and fast to apply.
Fast results.
USAGE AREAS:
Sprout planting and fixing bolts.
Bonding and fixing of stone building
elements.
Aluminum joinery and railing fixing.
To ensure the sealing of cracks before
injection.
( 23 °C Temparature and 50 % for relative
humidity)
Unit Volume Mass : 1,60 kg/lt
Adherance : >2,00 N/mm²
Application Time : 5 minute
Curing Time : 40 mint.
Application Temperature : +5°C +35°C
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
The hole diameter should be 4 mm bigger
than the pin diameter that to be anchored.
The hole depth should be roughly 15 times
the hole diameter.
The holes should be cleaned with a brush or
compressed air so that no dust, oil, foreign
matter remains.
Preparation Of The Mixture:
Ready for use.
Application:
Anchor:
The mixer tip is inserted into the mouth of
the cartridge.
DAYMAN BOND 861 should be squeezed
in a suitable place and the unmixed product
should be drained.
After providing the mixture is completed, the
2/3 of the hole is filled.
Iron, etc. to be anchored, rotated into the
hole.
The product should overflow from the
edges.
If not overflowed, the process continue as
adding the product and repeat.
Bonding:
The mixer tip is inserted into the mouth of
the cartridge.
DAYMAN BOND 861 should be squeezed
in a suitable place and the unmixed product
should be drained.
After the full mixture is provided, it is applied
to the surface to be bonded and the bonding
process is performed.
Do not move until fully cured.
Crack Sealing Before Injection:
The mixer tip is inserted into the mouth of
the cartridge.
DAYMAN BOND 859 should be squeezed
in a suitable place and the unmixed product
should be drained.
After the full mixture is achieved, the
cracked surface is applied in such a way
that it closes completely and reaches
maximum strength.
After full cure, the injection process is
started.
