Dayman Technical Build Chemicals

Phone : + 90 224 452 55 16

Email : info@dayman.com.tr

MORTAR ADDICTIVES

LIME – C – 504

It is a plaster and screed plasticizer additive that used in production of the plaster and
screed instead of the lime.

Description

It is a plaster and screed plasticizer additive
that used in production of the plaster and
screed instead of the lime.

DESCRIPTION:
It is a plaster and screed plasticizer additive
that used in production of the plaster and
screed instead of the lime.

ADVANTAGES:
Low cost
Labor cost is low.
Ready for use.
Used during concrete pouring.
Provides high quality mortar.
Increase the workability.
As the necessity of the water decrease
while using this product the durability.

USAGE AREAS:
Can be used instead of lime in cementbased mortar.
Indoor and Outdoor plaster production.
Walling of the brick and wall mortar.
Production of the screed.

Heat and %50 Relative Humidity)
Color : White-Transparent
Density : 20°C : 1,1 gr/cm3

Application:
The necessary water poured into a clean
bucket, the mortar that going to be prepared
should be dosed between %0,1 to % 0,5
according to mortar type, lastly mix with
mortar water.
Make the mortar with the prepared water.
The product must be put in to mixed water,
do not add directly to mortar

Temperature should be between +5 °C and
+35 °C during the application.
Do not apply on surfaces that are at risk of
frost.
In addition, it should not be applied in
extremely hot, rainy or windy weather.
This time can change according to
temperature and moist ratio.

CLEANING OF INSTRUMENTS:
DAYMAN LIME C –504 should be cleaned
by water just after the application.

CONSUME:
% 0,1 to % 0,5 of the total cement
percentage.
In order to catch the best dose and result,
the result of the test must checked.

PACKING:
30, 00 kg. Bin.
80×120 Pallet Dimension
Qty.on Pallet 24
5, 00 kg. Bin.
80×120 Pallet Dimension
Qty.on Pallet 120

COLOR:
White-Transparent

SHELF LIFE:
1 year from the production date under
proper storage conditions.
Opened packages should be kept tightly
closed.
Wear work clothes, protective gloves,
glasses and masks should be used during
application.

SAFETY RECOMMENDATIONS:
Skin and eyes should not be contacted, in
case of contact with wash plenty of water
and soap, if swallowed seek medical
attention immediately.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
Store out of reach of children.
This product packaging must be disposed of
in accordance with applicable laws.
This responsibility is belong the end user.
For more information please check the
Material Safety Data Sheet.

LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description

Click to view the Technical Sheet.

× WhatsApp Line