BITUMEN PLUS 300
Polymer modified bitumen rubber based, two component, elastic, high viscosity, thick
waterproofing coating.
Description
Polymer modified bitumen rubber based,
two component, elastic, high viscosity, thick
waterproofing coating.
- Usage Areas
- Technical Spesification
- Application Method
- Additional Information
- Technical Sheets
- Videos
DESCRIPTION:
Polymer modified bitumen rubber based,
two component, elastic, high viscosity, thick
waterproofing coating.
ADVANTAGES:
Solvent free and eco friendly
Easy prepare and application
Provides a complete coating without joint.
Can be used on vertical and horizontal
surfaces.
Excellent adhesion on surfaces.
Crack bridging feature.
USAGE AREAS:
On the foundation and platen walls,
Wet areas and retaining walls,
Protection and insulation of building and
structural elements exposed to leaking
water,
t can be used for gluing of insulation and
drainage plates.
( 23 °C Temparature and 50 % for relative
humidity)
Description : Bitumen Abosorbed, Rubber
and Poymer Modified
Color : Brown (Black After Dry
Consistence : Roll, trowel, spray
Application Temperature : +5°C +30°C
Use Time : 1-2 Hour
Dry Time : Min. 24 Hour
Water Contact : 48 Hour
These values were obtained as a result of
laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
The deep gaps on the surface should be
repaired by DAYMAN REPAIR PLUS,
DAYMAN EPO MORTAR or DAYMAN
BOND.
Corner joints should be chamfered with
DAYMAN REPAIR PLUS 4×4 cm.
The outer corners must be broken and
chamfered.
Preparation Of The Mixture:
The BITUMEN 303 should be mixed a
medium speed mixer is used for 400-600
rpm. until having a homogeneous mixture.
Application:
The surface to be applied should be primed
with DAYMAN BITUMEN PR solvent-free
bitumen primer and application should be
started after the primer has completely
dried.
The liquid component of the product can be
primed by diluting 1/5.
The material should be distributed with a
suitable brush and applied on horizontal
surfaces without allowing material
accumulation.
Allow the primer to dry and then proceed to
the actual application.
Consumption should be 0.25 kg/m².
Apply at least 2 coats on the prepared
surface with a brush, trowel or spray.
After the first coating, the surface must be
completely dry in order to do second
coating.
The second floor should be perpendicular to
the first floor. Foundation excavation should
not be closed until full drying takes place.
Filling should be done after the coating is
protected with suitable thermal insulation
and drainage plates.
If the weather is rainy or possible rainy days
the application should not be done,
After the application it must be protected
from strong wind, storm and sun,
The application should be made on the part
of the structure that comes into contact with
water.
As the product become slowly cured in the
cold weathers, the second coating must be
done when the first coating is completely
becoming dry.
Ensure that the ambient and floor
temperature is between 5 ° C and 30 ° C.
CLEANING OF INSTRUMENTS:
Dried product should be cleaned by solvent.
Not dried product should be cleaned by the
water.
CONSUME:
According to insulation class 3, 00 – 6,00
Kg/m²
PACKING:
30.00 kg.in a bin
Pallet Dimension:120×80
Qty.on Pallet:18
COLOR:
Brown—Black (when it dry)
SHELF LIFE:
1 year from the production date under
proper storage conditions.
Should be storage in the cool temperature,
should not take direct sun and without
allowing to froze.
Do not stack pallets on top of each other,
they should be shipped first in first out.
SAFETY RECOMMENDATIONS:
Wear suitable protective clothing, protective
gloves, goggles and mask during
application.
Hands and eyes must be protected with
gloves and protective glasses. In case of
contact with material, wash eyes with plenty
of water rinse and consult a doctor
immediately.
No food or beverage should be allowed in
the application area.
Store out of reach of children.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description