AQUAPOL PR – 800
Transparent, One Component, Polyurethane Based Primer product
Description
Transparent, One Component,
Polyurethane Based Primer product.
- Usage Areas
- Technical Specifications
- Method of Application
- Additional Information
- Technical Leaflet
- Videos
DESCRIPTION:
Transparent, One Component,
Polyurethane Based Primer product.
ADVANTAGES:
It adheres perfectly to all kinds of surfaces.
Easy implementation,
Provides excellent adhesion with absorbent
surfaces.
Dry in a short time.
It perfectly covers the surface
homogeneously.
Quick apply
After 4 hour, DAYMAN AQUAPOL810,
DAYMAN AQUAPOL UV 811, AQUAPOL
BITUMEN 812 or AQUAPOL TRANS 814
can be applied surface.
Can be used as primer for all polyurethane
products.
USAGE AREAS:
Concrete
Screed
Plaster
Wood
Any absorbent surface can also be used as
a polyurethane primer.
( 23 °C Temparature and 50 % for relative
humidity)
Coating Type : One Component
Polyurethane
Color : Transparent
Density : 1,01 gr/cm3 ±0.03
Viscosity : 10-50 cp
Application Temperature : +5 C ile +40 C
Teoric Consume : 0,1-0,3 kg/m2
Hardnes ASTM 02240 : 95 (Shore A)
Servic Heat : -5 ·C ile +80 ·C
Adhesion to Concrate : < 2,2 N/mm2
Application Metod: Roll,Brush,Spray
Dry Time: 1 hour
Coating Again: 4 hours
Complete Dry : 4 hours
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Application Instruments:
Mixer, brush, trowel, protection instruments
Surface Preparation:
Oil, grease, dirt, paint, salt and vomiting that
prevent adhesion should be removed.
The holes and gaps on the surface, should
be repaired with the repair mortar prepared
by mixing with DAYMAN PAIR PLUS and
DAYMAN EPO MORTAR or DAYMAN
EPO BOND.
Corner joints should be chamfered by
DAYMAN REPAIR PLUS with the size of
4×4, out corner joints should be broken first
and then chamfered.
Preparation Of The Mixture:
It should be mixed by a medium 400-600
rpm.mixer until having a homogenous
shape.
Application:
The application should be done by brush,
trowel or spray,
It suggested to use airless spray,
Polyurethane waterproofing product should
be applied after 2-4 hours depending on the
ambient conditions.
The floor moist ratio should not be more
than 5 %
If the weather is rainy or possible rainy days
the application should not be done,
After the application it must be protected
from strong wind, storm and sun in the first
24 hours,
The application should be made on the part
of the structure that comes into contact with
water.
As the product become slowly cured in the
cold weathers, the second coating must be
done when the first coating is completely
becoming dry.
Ensure that the ambient and floor
temperature is between 5 ° C and 30 ° C.
CLEANING OF INSTRUMENTS:
AQUAPOL PR – 800 should be cleaned by
solvent when it wet.
AQUAPOL PR – 800 after become dry
should be cleaned by the mechanical ways.
CONSUME:
Only for one layer, min.: 0,100 kg/m²
Total theoric consume: 0,100 – 0,300 Kg/m²
PACKING:
20, 00 kg bin
100×100 pallet dimension
36 qty.on pallet
5, 00 kg
120×80 pallet dimesion
75 qty.on pallet
COLOR:
Transparent
SHELF LIFE:
Shelf life is 12 months.
Should be stored in the dry and cool are,
should be attended to not put under sun or
the area that takes direct sun and should be
protected from the frost.
Do not stack pallets on top of each other, it
should be shipped first in first out.
SAFETY RECOMMENDATIONS:
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
Do not smoke during the application and
work in a well-ventilated place and away
from naked flames.
Hands and eyes should be protected by
protection equipment.
As cured materials has irritating effect, do
not touch with skin and eyes, in case of any
contact rinse with soap and plenty of water,
in case of any swallow see doctor urgently.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
It should be known that the solvent is
heavier than air, so remember that it will be
on the ground.
Store out of reach of children.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description