AQUAPOL TRANS – 814
Transparent aliphatic polyurethane based, single component, waterproof liquid
membrane which apply for protection
Description
Transparent aliphatic polyurethane based,
single component, waterproof liquid
membrane which apply for protection.
- Usage Areas
- Technical Specifications
- Method of Application
- Additional Information
- Technical Leaflet
- Videos
DESCRIPTION:
Transparent aliphatic polyurethane based,
single component, waterproof liquid
membrane which apply for protection.
ADVANTAGES:
Very high mechanic resistant.
UV resistant.
Even if the waterproofing layer is damaged
in any way the damaged part can be easily
repaired in a short time,
Easy implementation.
Maintain transparency even after years.
As being pure polyurethane can contact
continuously with water.
Heat resistance performance in wide
temperature range, it is between -40 °C and
+ 80 °C.
Even if the waterproofing layer is damaged
in any way the damaged part can be easily
repaired in a short time.
Resistant to alkali and chemicals.
USAGE AREAS:
Terraces and balconies,
Ceramic surfaces,
Glass surfaces,
Naturel stones and concretes,
( 23 °C Temparature and 50 % for relative
humidity)
Coating Type : One Component
Polyurethane
Color : Transparent
Density : 1,00 gr/cm3 ±0.02
Viscosity : 1000-1500 cp
Application Temperature : +5 C ile +30 C
Service Heating :+40 C and +80 C
Teoric Consume : 0,300-1,00 kg/m2
Adhesion to Concrate : < 2,0 N/mm2
QUV (ASTM G53) :3000 hour
Break Resistance : >35 N/mm2
QUV (ASTM G53) : 2000 hour
Application Metod: Roll,Brush,Spray
Dry Time: 6 hours
Coating Again: 8-24 hours
Complete Dry : 7 days
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
The holes and gaps on the surface, should
be repaired with the repair mortar prepared
by mixing with DAYMAN PAIR PLUS and
DAYMAN EPO MORTAR or DAYMAN
EPO BOND.
Corner joints should be chamfered by series
of DAYMAN REPAIR PLUS or DAYMAN
PAH BAND with the size of 4×4.
Out corner joints should be broken first and
then chamfered.
Preparation Of The Mixture:
The product should be mixed by a medium
400-600 rpm.mixer until having a
homogenous shape.
Application:
On the ceramic, glass and metal surfaces
should be used DAYMAN AQUA PLUS PR
before the application.
The application should be done by brush,
trowel or spray,
After first layer should be waited min.8 –
max.24 hour for the second layer.
The instruments that used during the
application must be cleaned in 2 hours.
On the primed surface, the bucket can be
immerse or poured, use brush or roll until
the surface completely covered, apply
minimum two layer,
The waiting time between the layer is 48
hour max.
If the weather is rainy or possible rainy days
the application should not be done,
After the application it must be protected
from strong wind, storm and sun in the first
24 hours,
The application should be made on the part
of the structure that comes into contact with
water.
As the product become slowly cured in the
cold weathers, the second coating must be
done when the first coating is completely
becoming dry.
During the application the temperature
should be between +5°C +30°C.
CLEANING OF INSTRUMENTS:
AQUAPOL TRANS – 814 should be cleaned
by solvent when it wet.
AQUAPOL TRANS – 814 after become dry
should be cleaned by the mechanical ways.
CONSUME:
Only for one layer, min.: 0,100-0,500 kg/m²
Total theory consume : 0, 200 – 1, 00 Kg/m²
PACKING:
20, 00 kg bin
100×100 pallet dimension
36 qty on pallet
5, 00 kg bin
80×120 pallet dimension
75 qty on pallet
COLOR:
Transparent
SHELF LIFE:
Shelf life is 12 months.
Should be stored in the dry and cool are,
should be attended to not put under sun or
the area that takes direct sun and should be
protected from the frost.
Do not stack pallets on top of each other, it
should be shipped first in first out.
SAFETY RECOMMENDATIONS:
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
Do not smoke during the application and
work in a well-ventilated place and away
from naked flames.
Hands and eyes should be protected by
protection equipment.
As cured materials has irritating effect, do
not touch with skin and eyes, in case of any
contact rinse with soap and plenty of water,
in case of any swallow see doctor urgently.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
It should be known that the solvent is
heavier than air, so remember that it will be
on the ground.
Store out of reach of children.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description