AQUAFLEX – 202
UV resistant elastomeric acrylic resin based, one component, coating based, and
waterproofing material
Description
UV resistant elastomeric acrylic resin
based, one component, coating based, and
waterproofing material.
- Usage Areas
- Technical Specifications
- Method of Application
- Additional Information
- Technical Leaflet
- Videos
DESCRIPTION:
UV resistant elastomeric acrylic resin
based, one component, coating based, and
waterproofing material.
ADVANTAGES:
UV resistant
Very high elasticity.
High degree of crack bridging feature.
Very high adherence.
Easy and fast application.
Can be applied with brush and spraying
equipment.
Due to elastic typify has high resistant to
temperature differences, %900 stretch.
Creates a waterproofing layer without joints,
seamless, permanent, moisture and
waterproof,
Has high penetration.
USAGE AREAS:
On untouched terraces,
Hidden gutter and roof waterproofing,
Repair of the bitumen shingle,
Steel sheet, galvanized steel sheet, panel
and coating waterproof,
Surface of concrete, screed and plaster,
On cement coated surfaces,
On bitumen surfaces (old surface is must)
( 23 °C Temparature and 50 % for relative
humidity)
Density : 1,40 kg/dm3
Max. Force Test : ≥30 N
Max. Flexablity : ≥8 N/mm2
Elongation at Break : ≥ % 900 (+23 °C)
Crack Bridging : 2 mm
Color: White
Final Resistance : Approx.14 days
Waterproofing Start : Approx.5 days
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
The deep holes and gaps on the surface
should be repaired by DAYMAR REPAIR
PLUS, DAYMAN EPO MORTAR or
DAYMAN BOND EPO.
Corner joints should be chamfered with 4×4
cm size with DAYMAN REPAIR PLUS.
Corners and joints should break and then
chamfered.
Preparation Of The Mixture:
It should be mixed by a medium 400
rpm.mixer until having a homogenous
shape.
Application:
The floor should be thinned with clean water
at a ratio of 1/1 of DAYMAN AQUAFLEX
202 and primed with the mixture that
prepared.
It should be applied by roller or brush or
spraying equipment by pouring on the
primed surface or dipping into the bucket
until the surface become covered.
Application should be started after the
surface become dry.
The surface definitely should be primed.
Each layer should be dry.
The instruments that used during the
application, should be cleaned in 2 hours.
Should not be applied in the places that has
negative water press.
After the application the area should be
protected from the frost, sun and strong
wind in first 24 hours.
The application should be done on the place
that contact with the water.
Due to material cured slowly in the cold
weather, the second layer should be done
after being sure that the first layer is dried.
Temperature should be between +5 °C and
+30 °C during the application
CLEANING OF INSTRUMENTS:
AQUAFLEX – 202 should be cleaned by
water when it wet.
AQUAFLEX – 202 after become dry should
be cleaned by the mechanical ways
CONSUME:
As a primer 0,150 – 0,300 Kg/m²
Total theory consume 1, 50 – 2, 50 Kg/m²
PACKING:
20, 00 kg bin
100×100 pallet dimension
36 oty.on pallet
5, 00 kg bin
80×120 pallet dimension
75 qty.on pallet
COLOR:
White
SAFETY RECOMMENDATIONS:
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
Do not smoke during the application and
work in a well-ventilated place and away
from naked flames.
Hands and eyes should be protected by
protection equipment.
As cured materials has irritating effect, do
not touch with skin and eyes, in case of any
contact rinse with soap and plenty of water,
in case of any swallow see doctor urgently.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
It should be known that the solvent is
heavier than air, so remember that it will be
on the ground.
Store out of reach of children.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description