AQUAPOL TRANS PR – 815
It is a primer which used before polyurethane applying for the surface of the ceramic,
glass, brick and metals etc
Description
It is a primer which used before
polyurethane applying for the surface of the
ceramic, glass, brick and metals etc.
- Usage Areas
- Technical Specifications
- Method of Application
- Additional Information
- Technical Leaflet
- Videos
DESCRIPTION:
It is a primer which used before
polyurethane applying for the surface of the
ceramic, glass, brick and metals etc.
ADVANTAGES:
Easy implementation.
No thinning is required.
Ready for use.
It is applied to ceramic, glass, glass brick,
granite ect.surfaces.
USAGE AREAS:
Terrace and balconies,
Ceramic surfaces,
Glass surfaces,
Glazed tile,
Granite,
Naturel stone and concrete.
( 23 °C Temparature and 50 % for relative
humidity)
Coating Type : One Component Primer
Color : Transparent
Viscosity : 40-50 cp
Application Temperature : +5 C ile +35 C
Teoric Consume : 0,05-0,08 lt/m2
Application Metod: Roll,Brush,Spray
Dry Time: 10-15 second
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
The holes and gaps on the surface, should
be repaired with the repair mortar prepared
by mixing with DAYMAN PAIR PLUS and
DAYMAN EPO MORTAR or DAYMAN
EPO BOND.
Corner joints should be chamfered by series
of DAYMAN REPAIR PLUS or DAYMAN
PAH BAND with the size of 4×4.
Out corner joints should be broken first and
then chamfered.
Preparation Of The Mixture:
The product should be mixed by hand or a
low 400-600 rpm.mixer until having a
homogenous shape.
Application:
DAYMAN AQUAPOL TRANS PR should be
applied by pouring on a clean cloth.
Apply by pressing on the floor and in a
circular motion.
After 0-15 15 minutes, DAYMAN AQUAPOL
TRANS should be applied to the surface
and should not be allowed to accumulate
dust.
If the weather is rainy or possible rainy days
the application should not be done,
After the application it must be protected
from strong wind, storm, frost and sun in the
first 24 hours,
During the application the temperature
should be between +5°C +30°C.
CLEANING OF INSTRUMENTS:
AQUAPOL TRANS PR – 815 should be
cleaned by solvent when it wet.
AQUAPOL TRANS PR – 815 after become
dry should be cleaned by the mechanical
ways.
CONSUME:
Only for one layer, min.: 0,05-0,08 kg/m²
PACKING:
1, 00 kg
4,00 kg
COLOR:
Transparent
SHELF LIFE:
Shelf life is 12 months.
Should be stored in the dry and cool are,
should be attended to not put under sun or
the area that takes direct sun and should be
protected from the frost.
Do not stack pallets on top of each other, it
should be shipped first in first out.
SAFETY RECOMMENDATIONS:
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
Do not smoke during the application and
work in a well-ventilated place and away
from naked flames.
Hands and eyes should be protected by
protection equipment.
As cured materials has irritating effect, do
not touch with skin and eyes, in case of any
contact rinse with soap and plenty of water,
in case of any swallow see doctor urgently.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
It should be known that the solvent is
heavier than air, so remember that it will be
on the ground.
Store out of reach of children.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description