Dayman Technical Build Chemicals

Phone : + 90 224 452 55 16

Email : info@dayman.com.tr

SPECIAL PAINTS

  • Dayman Technical Build Chemicals
  • Products
  • SPECIAL PAINTS
  • AQUAWALL – 606

    • AQUAWALL – 606

    UV resistant elastomeric, acrylic resin based, single component, sliding based, exterior
    waterproofing material.

    Description

    UV resistant elastomeric, acrylic resin
    based, single component, sliding based,
    exterior waterproofing material.

    Category

    DESCRIPTION:
    UV resistant elastomeric, acrylic resin
    based, single component, sliding based,
    exterior waterproofing material.

    ADVANTAGES:
    Decorative and aesthetic.
    It has very high elasticity.
    It has a high degree of crack bridging.
    Adherence is very high.
    Easy and fast to apply.
    Can be applied with brush and spray
    equipment.
    Due to its elastic structure, it is resistant to
    temperature differences.
    It is 1300% elastic.
    It forms a joint less, seamless, permanent,
    moisture and waterproof layer.
    It has strong penetration.

    USAGE AREAS:
    Can be used all exterior buildings.

    ( 23 °C Temparature and 50 % for relative
    humidity)
    Density : 1,40 kg/dm3
    Max. Force Test : ≥30 N
    Max. Stresch : ≥8 N/mm2
    Elongation at Break : ≥ % 750 (+23 °C)
    Color : Various
    ***These values were obtained as a result
    of laboratory tests, just contain finished
    applications according to drying time
    performance. Due to differences in
    temperature and humidity values in the
    construction site, the values may change.

    Surface Preparation:
    The surface; must be cured, dry and
    durable. Loose surface mortar and such as
    residues should be cleaned and reached
    durable surface.
    If necessary, repair with acrylic exterior
    putty.

    Preparation of Mixture:
    The product should be mixed with a medium
    speed mixer at a speed of 400-600 rpm until
    a homogeneous mixture is obtained.

    Do not apply in areas that has negative
    water pressure.
    It should be protected from the frost, sun
    and strong wind in first 24 hour.
    Application should be done on the part of
    the structure that comes into contact with
    water.
    Since the curing of the material will be
    slower in cold weather, the first coat must
    be completely dry before applying the 2nd
    coat.
    Should be attended to application
    temperature and should be applied between
    +5°C +30°C.

    CLEANING OF INSTRUMENTS:
    DAYMAN AQUAWALL 606 should be
    cleaned by water when it wet.
    DAYMAN AQUAWALL 606 after become
    dry should be cleaned by the mechanical
    ways.

    CONSUME:
    Total theoretical consume: 0,400 kg / m² –
    0,800 kg /m²

    PACKING:
    20, 00 kg. bin
    100×100 pallet
    36 qty on pallet

    SHELF LIFE:
    12 months.
    Store in a cool and dry area, protected from
    frost, away from direct sunlight.
    Do not stack the pallets on each other.

    SAFETY RECOMMENDATIONS:
    Wear suitable protective clothing, protective
    gloves, goggles and mask during
    application.
    Do not smoke during application and work
    in well-ventilated areas away from naked
    flames.
    Hands and eyes must be protected with
    gloves and protective glasses. In case of
    contact with material, wash eyes with plenty
    of water rinse and consult a doctor
    immediately.
    No food or beverage should be allowed in
    the application area.
    Store out of reach of children.
    For more information please check the
    Material Safety Data Sheet.

    LIMITATIONS OF LIABILITY:
    The information in this technical data sheet
    is given according to technical information,
    experience and test result.
    As GENERALTÜRK A.Ş. cannot control the
    usage of the product that used under which
    kind of conditions, it does not accept any
    responsibility for the application result and
    does not guarantee it.
    The product suitability for the product user
    should be tested and decided accordingly.
    All products should be considered in the
    advice of those technical knowledge and
    equipment.
    GENERAL TURK A.Ş cannot accept any
    responsibility that occurs because of missuse, it only responsible for the written
    suggestions that shows the products where
    and how use.
    GENERALTÜRK A.Ş. It may change the
    properties of its products without
    announcement.
    The technical data sheet is valid until the
    next time it is printed and all previous
    technical data sheets invalidate the
    description

    Click to view the Technical Sheet.

    PRODUCTS