CRYSTA – 503
It is the mixture of concrete and mortar that forms crystals in the concrete where it is
used
Description
It is the mixture of concrete and mortar that
forms crystals in the concrete where it is
used, prevents the water progressing with
capillary effect.
Category MORTAR ADDICTIVES
DESCRIPTION:
It is the mixture of concrete and mortar that
forms crystals in the concrete where it is
used, prevents the water progressing with
capillary effect.
ADVANTAGES:
Provides structural waterproofing.
Labor cost is low.
It works in negative and positive ways.
Used during concrete pouring.
Protects reinforcement from corrosive
effect.
Lives together with concrete.
It fills cracks with a thickness of 0, 40 mm
forming crystals.
It prevents the capillary from absorbing
water.
Used in machine plasters.
Ready to use.
USAGE AREAS:
Foundation concretes.
Shear concrete.
Tunnel and subway projects.
Sewage and treatment plants.
Retaining walls.
Preparation Of The Mixture:
The product is ready to use, shaking before
joining the concrete is useful.
Temperature should be between +5 °C and
+35 °C during the application.
Do not apply on surfaces that are at risk of
frost.
In addition, it should not be applied in
extremely hot, rainy or windy weather.
These time can change according to
temperature and moist ratio.
CLEANING OF INSTRUMENTS:
DAYMAN CRYSTA C –503 should be
cleaned by water just after the application.
CONSUME:
% 2 of the total cement percentage.
PACKING:
30, 00 kg. Bin.
80×120 Pallet Dimension
Qty.on Pallet 24
COLOR:
White-Transparent
SHELF LIFE:
1 year from the production date under
proper storage conditions.
Opened packages should be kept tightly
closed.
Store between + 5 and + 30 C to avoid frost.
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
SAFETY RECOMMENDATIONS:
Skin and eyes should not be contacted, in
case of contact with wash plenty of water
and soap, if swallowed seek medical
attention immediately.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
Store out of reach of children.
This product packaging must be disposed of
in accordance with applicable laws.
This responsibility is belong the end user.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description
PRODUCTS
- BITUMEN BASED WATERPROOFING PRODUCTS
- MINERAL BASED WATERPROOFING PRODUCTS
- RESIN BASED WATERPROOFING PRODUCTS
- POLYUREA BASED WATERPROOFING PRODUCTS
- REPAIR MORTAR
- CEMENT BASED FLOORING PRODUCTS
- EPOXY BASED FLOORING PRODUCTS
- CERAMIC ADHESIVE AND JOINT FILLERS
- MORTAR ADDICTIVES
- THERMAL INSULATION SYSTEMS
- AUXILIARY PRODUCTS
- MASTICS
- SPECIAL PAINTS
- PRIMERS
- ANCHORING PRODUCTS
- INJECTION PRODUCTS
- ACCESSORIES AND APPLICATION PRODUCTS