PURSIS 833
It is a two-component, pure polyuria system
Description
It is a two-component, pure polyuria system.
It is 100% solvent-free and 100% solid. The
aromatic product is very resistant to
abrasion. UV resistant.
- Usage Areas
- Technical Specifications
- Method of Application
- Additional Information
- Technical Leaflet
- Videos
DESCRIPTION:
It is a two-component, pure polyuria system.
It is 100% solvent-free and 100% solid. The
aromatic product is very resistant to
abrasion. UV resistant.
ADVANTAGES:
Fast applied (one employee / 1 hour / 250
m² / thickness 2 mm).
Applied as a thin layer (2-3 mm).
2 mm thick layer provides maximum
waterproofing
Setting time is 10 seconds
USAGE AREAS:
Car parks,
Irrigation channels,
Concrete surfaces,
Plaster and cement panels,
Internal and external application area,
Terraces,
Open top roofs,
Wet areas,
Baths,
Under coating areas,
Can be used in asphalt waterproofing
layers.
( 23 °C Temparature and 50 % for relative
humidity)
Coating Type : Two Component Polyuria
Color : Grey-Yellow
Density : 1,1 gr/cm³ ±0.06
Packing : 220 + 200 420 Kg
Application Temperature : +5 C ile +35 C
Teoric Consume : 2,00 – 2,50 kg/m²
Hardness : 80 (Shore A)
Elasticity : > %600
Dry Time: 6 hours
Coating Again: 20 second
Complete Dry : 1 hour
Total mechanical resistant : 7 days
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Preparation Of The Mixture:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
The holes and gaps on the surface, should
be repaired with the repair mortar prepared
by mixing with DAYMAN PAIR PLUS and
DAYMAN EPO MORTAR or DAYMAN
EPO BOND.
Corner joints should be chamfered by series
of DAYMAN REPAIR PLUS or DAYMAN
PAH BAND with the size of 4×4.
Out corner joints should be broken first and
then chamfered.
Application:
The surface should be primed with
AQUAPOL PR 800, AQUAPOL PR WT 801
or a suitable primer.
It should be applied to the prepared surface
with a brush, trowel or spray.
It is applied by spraying to the primed
surface with a special application machine.
If the weather is rainy or possible rainy days
the application should not be done,
After the application it must be protected
from strong wind, storm, frost and sun in the
first 24 hours,
The application should be made on the part
of the structure that comes into contact with
water.
As the product become slowly cured in the
cold weathers, the second coating must be
done when the first coating is completely
becoming dry.
During the application the temperature
should be between +5°C +30°C.
CLEANING OF INSTRUMENTS:
AQUAPOL – 833 – should be cleaned by
solvent when it wet.
AQUAPOL – 833 – 820- after become dry
should be cleaned by the mechanical ways.
CONSUME:
Total theory consume (for two layer): 2, 00 –
2, 50 Kg/m²
PACKING:
A Component 220 kg
B Component 200 kg
COLOR:
Grey – Yellow
SHELF LIFE:
Shelf life is 6 months.
Should be stored in the dry and cool are,
should be attended to not put under sun or
the area that takes direct sun and should be
protected from the frost.
Do not stack pallets on top of each other, it
should be shipped first in first out.
SAFETY RECOMMENDATIONS:
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
Do not smoke during the application and
work in a well-ventilated place and away
from naked flames.
Hands and eyes should be protected by
protection equipment.
As cured materials has irritating effect, do
not touch with skin and eyes, in case of any
contact rinse with soap and plenty of water,
in case of any swallow see doctor urgently.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
It should be known that the solvent is
heavier than air, so remember that it will be
on the ground.
Store out of reach of children.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description