Dayman Technical Build Chemicals

Phone : + 90 224 452 55 16

Email : info@dayman.com.tr

REPAIR MORTAR

EPO GROUT – 858

Epoxy based, solvent free, coarse gravel, high resistant repairmen mortar.

Description

Three component epoxy based, solvent
free, liquid, high resistant, quick set grout
mortar.

Category

DESCRIPTION:
Three component epoxy based, solvent
free, liquid, high resistant, quick set grout
mortar.

ADVANTAGES:
No need plaster.
Very high adherence.
Fast preparation and application.
Self Levelling due to homogeneous
property.
No shrinkage and shrinkage cracking.
Easy application.

USAGE AREAS:
It is used to fix turbines and fill in RES
switchboard.
Suitable for industrial usage.
To fix the machine feet.
To fix the steel columns.
In the assembly of prefabricated concrete
building elements.
Repair of the concrete surfaces.
Filling of the holes on the concrete.

( 23 °C Temparature and 50 % for relative
humidity)
Conventional Mass per Volume: 1,90
kg/dm3
Compressive Strength 28 days : ≥ 80
N/mm²
Bending Strength 28 days : ≥ 30
N/mm2
Adherence : 4,00N/mm²
Application Time : 20
minutes
Pre Setting Time : 24
Hours
Total Curing Time : 7 days
Heat Resistance : -20 °C +70°C
Application Temperature : +5°C
+35°C
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.

Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
In case of the necessity the surface should
cleaned mechanically
Oil, grease, dirt, paint, salt and vomiting that
prevent adhesion should be removed.
The percent of the moist must be under 4 %
before the application.

Preparation Of The Mixture:
Mixed A + B should be poured in a clean
bucket and mixed 2 minutes by low speed
mixer, then add the C component on the
ready mix.Finally use 400-600 rpm mixer
until it reaches a homogenous consistency
to make ready for the application

Application:
The product should poured and applied
with a trowel or spatula.
Thick applications can be applied in 2 -3
layers.
Wait until complete drying between coats.
The prepared product should be used within
20 minutes.
The expired, mixture should not be used
and should be disposed of.

Temperature should be between +5 °C and
+35 °C during the application.
Do not apply on surfaces that are at risk of
frost.
The product should protected from rain,
frost and negative out conditions till it cured.
The time period, can be vary according to
temperature and moist conditions.

CLEANING OF INSTRUMENTS:
DAYMAN EPO GROUT 858 should be
cleaned by solvent when it wet.
DAYMAN EPO GROUT 858 after become
dry should be cleaned by the mechanical
ways.

CONSUME:
1, 85 kg/m² for 1 mm.tickness.

PACKING:
A+B+C component: 15, 00 kg- set
100×100 pallet dimension
36 qty.on pallet

COLOR:
Grey

SHELF LIFE:
1 year from the production date under
proper storage conditions.
Opened packages should be kept tightly
closed.
Wear suitable protective clothing, protective
gloves, goggles and mask during
application.

SAFETY RECOMMENDATIONS:
As cured materials has irritating effect, do
not touch with skin and eyes, in case of any
contact rinse with soap and plenty of water,
in case of any swallow see doctor urgently.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
Store out of reach of children.
This product packaging must be disposed of
in accordance with applicable laws.
This responsibility rests with the end user of
the product.
For more information please check the
Material Safety Data Sheet.

LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description

Click to view the Technical Sheet.

× WhatsApp Line