Bond Coat for Cement Based Screeds
Description
It is a mortar bond coat primer used under
cement based screeds and layers.
DESCRIPTION:
It is a mortar bond coat primer used under
cement based screeds and layers.
ADVANTAGES:
Form a strong bond between old concrete
and screed.
Water impermeable.
Resistant to frost.
Suitable for internal and external use.
USAGE AREAS:
Horizontal and vertical surfaces.
Indoor and outdoor areas.
Before screed casting.
Before the use of repair mortar
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
The hole diameter should be 4 mm bigger
than the pin diameter that to be anchored.
The hole depth should be roughly 15 times
the hole diameter.
The holes should be cleaned with a brush or
compressed air so that no dust, oil, foreign
matter remains.
Preparation Of The Mixture:
Dayman Level PR is ready for use.
Application:
The product is applied to the floor with a
brush.
It should be covered with screed or cement
based product before not
become completely dry.
Temperature should be between +5 °C and
+35 °C during the application.
Do not apply on surfaces that are at risk of
frost.
The product should be protected from rain,
water, frost and negative external factors
until curing.
After the application should prevent from
direct contact with water the first 24 hours.
CLEANING OF INSTRUMENTS:
DAYMAN LEVEL PR – 617 should be
cleaned by water when it wet.
DAYMAN LEVEL PR – 617 after become
dry should be cleaned by the mechanical
ways.
CONSUME:
Various 0,150 – 0,300 kg/m².
PACKING:
30 kg.
COLOR:
Light Blue.
SHELF LIFE:
1 year from the production date under
proper storage conditions.
The opened pack should be closed tightly.
SAFETY RECOMMENDATIONS:
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
As it is cement based do not swallow the
powder.
Due to the irritating effects of the cured
materials, skin and eyes should not be
contacted, in case of contact with wash
plenty of water and soap, if swallowed seek
medical attention immediately.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
Store out of reach of children.
This product packaging must be disposed of
in accordance with applicable laws.
This responsibility is belong the end user.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of miss
use,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description
