DESCRIPTION:
Cement based, fast setting, single
component water stopper, containing
special chemical additives, powder
waterproof product.
ADVANTAGES:
When it comes into contact with water, it
enters the reaction and hardens in 3-6
seconds to cut off the flow of water.
Easy and fast preparation.
USAGE AREAS:
Stopping the pressurized water,
Stopping the active leackage of the water
on cracks,
Stopping the water leackage,
Waterproofing of the cocrate surfaces,
Waterproofing of the elevator well,
Waterproofing of the horizontal and vertical
surfaces,
Negative and positive side waterproofing,
In water stocks,
Reinforcement concarte
( 23 °C Temparature and 50 % for relative
humidity)
Application Temperature : +5°C +30°C
Compressive Strenght 30 minutes later:
7 N/mm²
Heating Strenght : -20°C +80°C
Coating on: 30 second
Final Setting : 3 minutes
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
In case of the necessity the surface should
cleaned mechanically
Oil, grease, dirt, paint, salt and vomiting that
prevent adhesion should be removed.
Application:
Take enough DAYMAN W-STOP SPEED to
your hand and press trough to empty hole
that water is come. Keep pressing until
ensure that the water is stopped.
Due to the water has a direct effect on the
reaction rate, the mix should be done with
the warm water in winter, it will help to have
a fast result.
The expired mortar should be disposed of.
