BOND – 861
Polyester Based Chemical Anchor Product
Description
Polyester based, two component chemical
anchoring product.
- Usage Areas
- Technical Specifications
- Method of Application
- Additional Information
- Technical Leaflet
- Videos
DESCRIPTION:
Polyester based, two component chemical
anchoring product.
ADVANTAGES:
Applied with pistol.
It is economical.
Thixotropic, does not sag.
Easy and fast to apply.
Fast results.
USAGE AREAS:
Sprout planting and fixing bolts.
Bonding and fixing of stone building
elements.
Aluminum joinery and railing fixing.
To ensure the sealing of cracks before
injection.
( 23 °C Temparature and 50 % for relative
humidity)
Unit Volume Mass : 1,60 kg/lt
Adherance : >2,00 N/mm²
Application Time : 5 minute
Curing Time : 40 mint.
Application Temperature : +5°C +35°C
***These values were obtained as a result
of laboratory tests, just contain finished
applications according to drying time
performance. Due to differences in
temperature and humidity values in the
construction site, the values may change.
Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
The hole diameter should be 4 mm bigger
than the pin diameter that to be anchored.
The hole depth should be roughly 15 times
the hole diameter.
The holes should be cleaned with a brush or
compressed air so that no dust, oil, foreign
matter remains.
Preparation Of The Mixture:
Ready for use.
Application:
Anchor:
The mixer tip is inserted into the mouth of
the cartridge.
DAYMAN BOND 861 should be squeezed
in a suitable place and the unmixed product
should be drained.
After providing the mixture is completed, the
2/3 of the hole is filled.
Iron, etc. to be anchored, rotated into the
hole.
The product should overflow from the
edges.
If not overflowed, the process continue as
adding the product and repeat.
Bonding:
The mixer tip is inserted into the mouth of
the cartridge.
DAYMAN BOND 861 should be squeezed
in a suitable place and the unmixed product
should be drained.
After the full mixture is provided, it is applied
to the surface to be bonded and the bonding
process is performed.
Do not move until fully cured.
Crack Sealing Before Injection:
The mixer tip is inserted into the mouth of
the cartridge.
DAYMAN BOND 859 should be squeezed
in a suitable place and the unmixed product
should be drained.
After the full mixture is achieved, the
cracked surface is applied in such a way
that it closes completely and reaches
maximum strength.
After full cure, the injection process is
started.
Temperature should be between +5 °C and
+35 °C during the application.
Do not apply on surfaces that are at risk of
frost.
The product should be protected from rain,
water, frost and negative external factors
until curing.
CLEANING OF INSTRUMENTS:
DAYMAN BOND – 861 should be cleaned
by solvent when it wet.
DAYMAN BOND– 861 after become dry
should be cleaned by the mechanical ways.
CONSUME:
Density. 1, 60 kg. /lit.
PACKING:
280 ml. cartridge.
COLOR:
Grey
SHELF LIFE:
1 year from the production date under
proper storage conditions.
The opened pack should be closed tightly.
SAFETY RECOMMENDATIONS:
Wear work clothes, protective gloves,
glasses and masks should be used during
application.
Due to the irritating effects of the cured
materials, skin and eyes should not be
contacted, in case of contact with wash
plenty of water and soap, if swallowed seek
medical attention immediately.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
Store out of reach of children.
This product packaging must be disposed of
in accordance with applicable laws.
This responsibility is belong the end user.
For more information please check the
Material Safety Data Sheet.
LIMITATIONS OF LIABILITY:
The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
equipment.
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
announcement.
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the
description