Dayman Technical Build Chemicals

Phone : + 90 224 452 55 16

Email :


D-THERM – 556

It is a water based, acrylic emulsion based exterior primer.


It is a water based, acrylic emulsion based
exterior primer.

It is a water based, acrylic emulsion based
exterior primer.

Increases ground adherence with paint to
be coated on.
Balances paint consumption.
Suitable for acrylic plasters.
Excellent adhesion to mineral surfaces.
Easy to apply.
Water vapor permeable.

D-THERM 555 Under exterior paint,
Under D-THERM 554 – D-THERM 553,
Can be used as a primer on all acrylic
based products.

((23°C, %50 Relative Humudity)
Pre Dry (Min.) :4 Hours
Coating on Again (min) :8 hours
Application Temperature : +5°C +30°C
Color : White
*** These values are valid for the
performance of the finished applications at
the end of the full drying period (28
days). Due to differences in temperature
and humidity values in the construction site,
the values may change.

Surface Preparation:
The surface; must be cured, dry and
durable. Loose surface mortar and such as
residues should be cleaned and reached
durable surface.
In case of the necessity the surface should
cleaned mechanically
Oil, grease, dirt, paint, salt and vomiting that
prevent adhesion should be removed.

Preparation Of The Mixture:
D-THERM – 556 is mixed with low speed
mixer at 400 rpm until it reaches
homogeneous consistency.
Can be thinned by water maximum 10%

DAYMAN D-THERM – 556 It should be
applied on the surface with roller, brush and
suitable spraying equipment.

Temperature should be between +5 °C and
+35 °C during the application.
Do not apply on surfaces that are at risk of
n addition, it should not be applied in
extremely hot, rainy or windy weather.
After the application the applied area should
prevent from the direct water contact in 24

DAYMAN D-THERM 556 should be cleaned
by water when it wet.
DAYMAN D-THERM 556 after become dry
should be cleaned by the mechanical ways.

Various 0,150 – 0,250 Lt /m².

15,00 kg. Bin
100×100 Pallet Dimension
36 Qty on Pallet


1 year from the production date under
proper storage conditions.
Close tight the opened bags.

Wear work clothes, protective gloves,
glasses and masks should be used during
As it cement based, do not breath and do
not touch with skin and eyes,
Due to the irritating effects of the cured
materials, skin and eyes should not be
contacted, in case of contact with wash
plenty of water and soap, if swallowed seek
medical attention immediately.
Food and beverage materials should not be
kept in the application area and should not
be eaten.
Store out of reach of children.
This product packaging must be disposed of
in accordance with applicable laws.
This responsibility is belong the end user.
For more information please check the
Material Safety Data Sheet.

The information in this technical data sheet
is given according to technical information,
experience and test result.
As GENERALTÜRK A.Ş. cannot control the
usage of the product that used under which
kind of conditions, it does not accept any
responsibility for the application result and
does not guarantee it.
The product suitability for the product user
should be tested and decided accordingly.
All products should be considered in the
advice of those technical knowledge and
GENERAL TURK A.Ş can not accept any
resposibility that occures because of missuse,it only responsible for the written
suggestions that shows the products where
and how use.
GENERALTÜRK A.Ş. It may change the
properties of its products without
The technical data sheet is valid until the
next time it is printed and all previous
technical data sheets invalidate the

Click to view the Technical Sheet.

× WhatsApp Line